FH203 – 240 50Hz – Closed impellers
Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar.
For alternating machining using internally and externally cooled tools, these models are available with Y/YY-connfigured pole-changing motor (Dahlander) for optional changeover to half speed operation.
A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point.
See page “Control/Regulation” in the Technical Information section of this catalog for further information.
| Construction | |
| Pump body | Cast iron |
| Cover | Cast iron |
| Impellers | CrNi-steel |
| Shaft | CrNi-steel |
| Diffusers | CrNi-steel |
| Mechanical seal | SiC |
| O-rings | Viton |
| Optional: | |
| Pole-changing motor | 4 – 2 poles |
| Pump body | Bronze |
| Cover | Bronze |
| Noise level | |
| FH203 – 223 | 58 dBA |
| FH224 – 240 | 63 dBA |
Types of fluid
Kinematic viscosity
Pumping temperature
With up to 2,000 coolant pumps and pumping accessories in stock, customers are assured of a prompt service. Information for all our products are available on our website, offering a comprehensive knowledge base.
We look forward to doing business with you, for a prompt friendly service call…
